点击图片查看原图
Universal Cutting and Forming Machine
for belted radial Components and touch-facility to eliminate any kind of Belt Tolerances
|
|---|
 |
|
Components      |
| Specification | |
| - dimension | 1100 x 550 x 500 mm |
| - weight | approx. 30 kg |
| - electrical | 230 V / 50 Hz / 250 W |
| - compressed air | 6 bar |
| - Tools | double-processing unit (forming upwards and downwards is possible) |
| - pitch | 2,54; 5,08; 7,62 mm |
| - lead Ø | max. 0,8 mm |
| - operation | engine (continuously variable) |
| - components | delivery: roll or ammo-pack outgoing: loose |
| - production rate | 3.500 pcs/hr |
| - Optional | - preselection counter and batch counter |
|
- tape-chopper |
|
| - combined location for reel or ammo-pack | |
|
Description: To eliminate belt-tolerances the Burst & Zick machine Type C 069 G was developed with an integrated touch-facility. With this all usual in the trade component-belts which meet the IEC-Norm can effortless be processed. The component is formed and cut with a maximum tolerance of ± 0,1 mm. The supply of components is exclusively done by reel. For this the machine has a combined location for reel and amo-pack. To save set-up time all necessary toolkits for specific formings are mounted in one unit. These toolkits can be inserted or exchanged within a very short time. When inserting a toolkit the driving-mechanism automatically will be locked. The machine is prepared to keep 2 processing-units. One unit performs upward formings and the other performs downward formings. After the components have been formed and cut they are ejected into a bin for collection. |
|